best ddr4 ram for music production
so, the question you are asking yourself is, how much of the best DDR4 RAM do you need for music production.? In this article about the best DDR4 RAM for music production, we will discuss the best attributes of DDR4 RAMS for music production. Speed, latency, and capacity are factors we need to consider.
For forever, “How much RAM do I need for music production?” has been asked by aspiring producers. There is a straightforward answer to that question; you should never buy more than you need. Due to this, aspiring producers with limited funds are advised to invest in a minimal amount of RAM (and still achieve their goals).
Is there anything else I need to know?” I consider 8 GB of RAM to be sufficient for music production (in this case, I’m talking about general usage).
Is a lot of rams good?
To gain a better understanding of this topic, the article will discuss whether or not using lots of RAM is actually worth it when it comes to music production. Additionally, it will indicate how much RAM is required for different DAWs and plugins.
Last but not least, we’ll suggest how much memory you need based on your needs!
Would 8 GB of RAM be sufficient? In some cases, 8 GB is sufficient, but… Depending on your situation, you will need different amounts of memory. It is prudent to spec your computer out to the maximum, especially if you are a renowned producer with a lot of money.
If you’re a budget user, start with 8 GB. Instead of investing the “left-over” money in memory, consider buying a more powerful CPU. There’s one key point that everyone seems to overlook: you may be able to expand your memory, but you may not add (or upgrade) your processor. It is technically possible, but the CPU for your motherboard won’t be available by the time you want to upgrade.
CPU VS RAM in music production
Memory technology advances at a much slower pace than CPU technology. For memory, you do not have to be future-proof, but you must be for the processor. You can expand memory later if you’re smart about it. Memory is getting cheaper. If money plays a big role, buying lots of memory for your computer is a waste.
There is one thing I want to mention. The memory of some computers/laptops (such as Mac computers) cannot be added or exchanged. When buying a new computer, make sure you get the maximum memory specifications. Digital audio workstations have different methods of managing memory.
In terms of projects (I mean songs), different DAWs handle memory differently. Different DAWs use the same amount of space for the plugins since a plugin is a standalone program called by the DAW. While most DAWs allow you to switch between projects, each one does it differently.
The program loads the project from the hard drive and loads it into memory. As you switch projects, the hard disk loads the new project into memory from the hard disk, and all the data from memory is unloaded. You must repeat the same procedure when switching back to your original project: load from the hard drive, unload from memory and reload from the hard drive.
It is extremely slow to load from a hard drive (even an SSD), so switching between projects takes a really long time in Logic. Unlike computer programs, Presonus Studio One loads a project in memory and does not unload it unless you explicitly request it. Since each open project is loaded into memory, real-time project switching is possible but is memory inefficient. In other words, when you are using Studio One and switching between projects, you need a lot more memory.
Best DDR4 RAM for music production
Here are some of the best RAM you can buy from Amazon to aid in your music production activities.
Corsair Vengeance LPX 16GB DDR4-3200
The CMK16GX4M4B3200C16 quad-channel memory kit from Corsair demonstrates good performance numbers, but its “good value” is limited to builders who require or desire the fans included. Included fans can be even more useful in builds where there is no fan mounted over the processor. Corsair Vengeance LPX is surprising among the best DDR4 for photoshop editing.
We have seen DDR4 prices drop so far in 2017 that a 16GB kit (4x4GB) of DDR4 costs only $10 more than DDR3 at a 2133MHz data rate. For anyone who skipped X79 and now wants to get into X99 for about the same price, that’s excellent news. However, that’s not exactly the best data rate anymore. A socket LPX Vengeance CMK16GX4M4B3200C16 DDR4-3200 by Corsair costs roughly a third of that of its DDR3-3200 at the same capacity. The disagreement over data rates for DDR4 versus DDR3 timings might be interesting, but it won’t matter if your platform only supports DDR4. It might be more relevant to ask whether this expensive DDR4-3200 kit is compelling enough to compel X99 owners to choose it instead of lower-priced DDR4-3000, 2800, or 2666.
The DDR4-3200 is rated highly
The motherboard and DRAM temperatures are reduced by two included cooling fans
1.35V has limited overclocking potential
The price of the fans is included in the total
G. Skill Trident Z RGB
Trident Z RGB DDR4-3600 by G.Skill, currently available for $225, is an appealing value purchase. However, the kit is unavailable in the US, at least in a market that rarely sees too much good. There is a much higher price of £350 in the UK, which could explain why the device hasn’t sold out yet. It has been preferred as an ideal DDR4 for core i9 9900K processor.
As the US inventory has been depleted twice in two weeks, we have been unable to formulate a coherent recommendation. We have since thrown in the towel. When you can locate it at current US pricing, this kit is a nice option, but you should wait until stock arrives at your outlet of choice when the time comes.
G.Skill’s Trident Z RGB (part number F4-3600C17D-32GTZR) is another kit we reviewed recently featuring 2x 16GB DDR4 modules. The Trident Z RGB is designed for high-end fans of performance with increased frequency, reasonable timings, stylish brushed aluminum heat spreaders, and RGB lighting. There are even light and dark sides to the sleek heat spreaders, so they appear balanced.
In our testing, we found that G.Skill’s Trident Z RGB DDR4-3600 C17 is consistently in stock, so we’d be able to recommend it. Take advantage of the low price and availability if you are interested. However, we recommend that people do not wait for availability when so many other compelling choices are available.
Optimal data rate timings
An excellent performance
A cheaper alternative to non-RGB kits
There is a limited supply
XMP overclocking isn’t much
Kingston Hyper X Fury
The specs are as follows;
Capacity 16GB (2*8GB)
Bus Speed 2666 MHz (1333 MHz)
Voltage 1.2v (1.35v Max)
Heatsink Aluminum Black Heat Spreader
FURY DDR4’s heat spreader has a low-profile asymmetrical design. Right at the top corner is the shining HyperX logo, which is bigger and more prominent than the other logos. The HyperX logo is appealing, which appears on almost all of their gaming RAMs. In some ways, it reminds me of the DDR3 Fury RAM module. Our roundup also contains our recommendations for the best DDR3 RAMs. This RAM has proven to be very perfect for Core i7 9700K Intel processors.
A sticker usually appears on the backside that contains warranty information. As with the previous RAM kit, this one has a Warranty void sticker with model number and capacity information. It is essential to note that if you remove this sticker intentionally or accidentally, the warranty won’t be valid, and you can’t claim it.
TEAM XTREEM ARGB 16GB DDR4-3600MHz C14
Its 14 CAS latencies make it an excellent choice for low-latency RAM favored by AMD Ryzen PCs. The best DDR4 RAM for music production, in our opinion, is this one.
A kit with so many positive features and so few negative ones would’ve been impossible back in the day. DRAM prices have plummeted recently, and manufacturers are becoming more adept at producing DDR4 products, which can often be had for under $100.
For AMD’s Ryzen CPUs users; AMD’s CPUs typically favor a memory clock around 3,600MHz, which keeps your Infinity Fabric clock at a 1:1 ratio with both your memory and your chip ticking along as they should, with minimal latency penalties. For AMD Ryzen processors, a kit such as the Team Xtreem is perfect.
Colorful CVN Guardian 16GB DDR4-3200
Indeed, RGB LEDs on your memory sticks won’t speed up your rig, but they will undoubtedly add some flare to your room. Or, at the very least, your system’s appearance. With its $95 price tag and dual-channel 16GB kit (opens in new tab), the Colorful CVN Guardian DDR4 is probably the most affordable option for gaming systems interested in getting that all-important RGB appearance.
They are chipped with Micron E-die DDR4 memory chips, have decent CL16 timings, if a little bare, and come in 8GB trim. The memory controller is also easier on them than something like the Samsung B-die, so they’re suitable for Ryzen builds. This could mean that you will get higher frequencies but probably won’t be able to tighten up the actual timings as much.
The CVN Guardian performs quite well for an affordable DDR4-3200 kit, adapting instantly to our test board’s XMP set-up. It is possible to overclock the kit as well. With some slightly looser timings, it can reach at least DDR4-3600, still at CL16.
A solid, affordable, good-looking option for those just looking for some solid memory is the CVN Guardian. There is an aluminum heat spreader and RGB lighting, and it has some headroom too. Micron chips are used, and the aluminum heat spreader and RGB lighting look great.
Music producers need RAM with the highest clock speed
The speed of RAM is also measured in MHz/GHz, the same way as processor speed. For DDR4, the speed usually ranges from 2,133 MHz to 3,200 MHz.
It’s a question of whether this is just another marketing scheme.
The middle ground seems to be the best place to be. Your RAM can experience instability if it has the fastest clock speed possible. Performance is affected much more by the CPU’s clock speed no matter what, so it’s not worthwhile to increase it.
Any frequency around 2,400 MHz would be sufficient for the best DDR4 for Music production.
When you experience slow system performance, and your RAM is not at its limit, most likely your CPU needs to be upgraded. Upgraded CPUs can really revive your recording system. The rest of it, however, I don’t really think music producers should go any further.
The only requirement is to have DDR4 RAM with at least 2,400 MHz speed! In any case, the main task is done by your CPU, so just make sure you have enough RAM. My recommendations will follow now.
Which is the best RAM for music production?
Most music producers will be fine with 8 GB of RAM. In order to emulate acoustic instruments realistically, you will need large sample libraries that are available in 16 GB or 32 GB. However, before you buy excessive RAM for your computer, think twice.
Is 32GB RAM overkill for music production?
Despite Rick Beato’s YouTube video, most music producers don’t need more than 16GB of RAM. Anyone with more than 16GB should only do so if they have hundreds of plugins, samples, and tracks running simultaneously. Most producers do not require this kind of memory.
Is Ryzen 5 good for music production?
Music producers should look for a CPU with at least four cores. For simple projects, a dual-core Intel i5 or AMD Ryzen 5 is sufficient, but for more involved projects, a quad-core Intel i5 or AMD Ryzen 5 is recommended.
More often than not, most DDR4 rams of base speed equal to or greater than 2200MHz, as we saw in a previous article on best RAM for Ryzen 5 3600, are compatible with Ryzen 5 process.
Final thoughts on the best DDR4 RAM for music production
The modern music production process puts a lot of demand on your new CPU, so you need to keep it cool. However, you shouldn’t let your acoustic guitar or vocal recording be disturbed by loud computer fans. To conclude, I would recommend that you get a CPU cooler tower composed of a heatsink and two fans. With two slower-speed fans running on the heatsink, most of the heat will be dissipated, and the ambient noise of your studio will be reduced.
A large cooler such as this can occupy a significant amount of room on your motherboard, so make sure your RAM cards and PCI devices like graphics cards and USB expansion cards can still fit, as this is not always the case.
It is also possible to reduce fan noise by using computer cases with insulation on the inside. Additionally, water coolers typically require only one large fan that runs at a slow speed. However, that is another topic for another article.
Wishing you the best of luck with your Music Production PC build or upgrade. You can ask me anything you want in the comments section or by email.